FLAGRO CONSTRUCTION HEATERS

  • Engineered for easy operation and minimal servicing
  • Electronic direct spark ignition control
  • Equipped with 100% flame safeguard system
  • Designed for commercial applications
  • Just turn the fuel selector valve to change the fuel supply
  • Environmentally friendly with minimal combustion impurities
  • Temporary heat for construction and maintenance

SPECIFICATIONS

ModelF-400TF-1000TF-1500T
FuelPropane or Natural GasPropane or Natural GasPropane or Natural Gas
BTU/HR400,0001,000,0001,500,000
Inlet Pressure Propane11 in W.C.11 in W.C.11 in W.C.
Inlet Pressure Natural Gas3.5 in W.C.7 in W.C.9 in W.C.
Voltage115 V115 V115 V
Frequency60 Hz60 Hz60 Hz
PhaseSingle PhaseSingle PhaseSingle Phase
Current15 amps20 amps20 amps
Fan Motor Capacity1/3 hp1 hp1 hp
Air Circulation2,000 CFM7,000 CFM7,000 CFM
Fuel Consumption Propane4.35 GPH10.82 GPH16.24 GPH
Fuel Consumption Natural Gas380 CFH952 CFH1,428 CFH
IgnitionDirect Spark ControlDirect Spark ControlDirect Spark Control
Thermostat ControlYesYesYes
Length48 in61 in61 in
Width22 in29 in29 in
Height24 in38 in38 in
Air Outlet Diameter15 in26 in26 in
Second Stage RegulatorB42R0.75 (3/4" NPT) DualB42R1.25 (1 1/4" NPT) DualB31R1.25 (1 1/4" NPT) Dual
Hose AssemblyOptional 50' x 3/4"N/AN/A
Foot NoteRegulator sizing assumes job site inlet pressure of 5-10 PSI. Custom hose assemblies are available upon request.Regulator sizing assumes job site inlet pressure of 5-10 PSI. Custom hose assemblies are available upon request.Regulator sizing assumes job site inlet pressure of 5-10 PSI. Custom hose assemblies are available upon request.
Weight90 lbs314 lbs314 lbs
CFM2,0007,0007,000